Parts List - source for 6522?

Forum for the discussion of building and moding the ProDEV DDT debugger boards

Moderator: support

Parts List - source for 6522?

Postby support » Wed Jun 22, 2005 9:47 pm

I printed off the parts list and most of it looks easy enough to come by except maybe the 6522.

Anyone have a source for these chips?

Glenn
support
Site Admin
 
Posts: 169
Joined: Tue Mar 08, 2005 10:49 pm
Location: Ajax, On, Canada

Postby ProDev » Thu Jun 23, 2005 8:57 pm

Chuck
ProDev
 
Posts: 12
Joined: Thu Jun 23, 2005 8:46 pm
Location: La Salle, MI

Parts

Postby support » Thu Jun 23, 2005 9:10 pm

Well I went out and bought all the parts today to make my two cards. I the only thing I am missing is the 6522's which I guess I will order from Jameco - thanks for the tip.

As a side note is there anything easily obtainable that one might scavage a 6522 from ?

Didn't early Mac's use them? Probably soldered in though.

Glenn
support
Site Admin
 
Posts: 169
Joined: Tue Mar 08, 2005 10:49 pm
Location: Ajax, On, Canada

Parts

Postby Wilserv » Sat Jun 25, 2005 4:41 pm

Hi!

I can't seem to find a source for the 6264 SRAM chip.

Willi
Wilserv
 
Posts: 9
Joined: Sat Jun 25, 2005 4:05 pm
Location: Blackwood, New Jersey

Source for 6264

Postby support » Sat Jun 25, 2005 6:18 pm

Jameco has them as well although the slowest part is 120 nanoseconds and the picture shows - 15 which is 150 nanoseconds I believe.

http://www.jameco.com/webapp/wcs/stores ... ctId=42892

This part is LP - All I could find was ALP - hope it works - have not looked into what the difference is yet.

Glenn
support
Site Admin
 
Posts: 169
Joined: Tue Mar 08, 2005 10:49 pm
Location: Ajax, On, Canada

Source for 6264

Postby Wilserv » Sat Jun 25, 2005 6:54 pm

Nuts, should have waited for your response. I ordered the 62256 which I read was equivalent but is more expensive.

Willi
Wilserv
 
Posts: 9
Joined: Sat Jun 25, 2005 4:05 pm
Location: Blackwood, New Jersey

Postby ProDev » Sat Jun 25, 2005 10:17 pm

Another source for parts is JDR Microdevices

http://www.jdr.com
Chuck
ProDev
 
Posts: 12
Joined: Thu Jun 23, 2005 8:46 pm
Location: La Salle, MI


Return to DDT Build and Mod

Who is online

Users browsing this forum: No registered users and 2 guests

cron